Atemio Multiswitch 9/16

Atemio Multiswitch 9/16
Atemio Multiswitch 9/16
Varenummer: 10016023
Tilgjengelig: 1
Eks mva: 1.839,20
2.299,00

Atemio 9in / 16out standalone distribution system. This multi-switch is suitable for the distribution of 8 SAT-IF levels including passive terrestrial for up to 16 subscribers.

Stand-alone multi- switch with passive terrestrial input
Compatible with Quattro-LNB
All switches and multiswitches for more than one satellite are compatible with DiSEqC 2.0 or lower versions
integrated power supply

Technical specifications:

Model name: Atevio MS 9/16 Classic Line
Construction: 9 inputs / 16 subscriber outputs
Reception: 2 satellites, 1 terrestrial antenna
Terrestrial Active (Enhancement): No
Sat area Active (amplification): No
Digital-Ready (DVB-S): Yes
HDTV-compatible (DVB-S2): Yes
Quad-LNB compatible: No
Signal level: No
Can be used as a cascade closure part: Yes

Frequency range SAT: 950 ~ 2300 MHz
Frequency range Terr .: 40 ~ 862 MHz
Connection attenuation SAT: 0 dB (typ.)
Connection attenuation Terr .: 2 dB (typ.)
Decoupling SAT / SAT: min. 20 dB
Max. Input level SAT: 85 dBμV
Max. Output level SAT: 85 dBμV
Max. Input level Terr .: 87 dBμV
Max. Output level Terr .: 85 dBμV
Backflow Loss: No
Satellite switching: DiSEqC
Shielding dimension: not specified
Input Terrestrial: 1 F-female connector
Input sat-planes: 8 F-female connections
Subscriber outputs: 16 F-female connections

Power switch: No
Switching power: No
Energieschonend: Yes
Short circuit proof: Yes
LNB current output: 1600 mA max.
Power requirement from the receiver: not specified
Power consumption: 35 watts
Internal power supply: 18 V / 1600 mA
Power supply: 90 ~ 265 V AC / 50/60 Hz
Operating temperature: -25 ~ + 60 ° C

Width: 152 mm
Height: 82 mm
Length: 445 mm
Weight: 1346 g
Distance of the F-connections input (middle-center): 1.8 cm
Distance of the F-connections output (center-center): 1.8 cm

Utviklet av Wilcom AS
Satbutikken.no © 2017